spacer.png, 0 kB


*New installations only.

Schwartz's HVAC
7600 East Michigan
Kalamazoo, MI 49048

Ph: 269-385-3188

spacer.png, 0 kB
spacer.png, 0 kB

Schwartz's is a fully licensed and insured H.V.A.C. specialist. We are a family owned and operated business in Kalamazoo, Michigan. We have 26 years of local experience in H.V.A.C. and provide prompt local service.  Our business is proud to hold the highest refrigeration certification in the industry. We guarantee our service and installs you can talk right to the owner and get your questions answered.

5 Star Testimony from Yahoo Local:

Schwartz’s did a fantastic job installing our Rheem furnace at the end of December. Even though they were busy, Mike and his son made sure the unit was installed before the tax rebate ended at the end of the year. They gave the best price in town on a top of the line furnace. Unlike the other quotes, they did not try to also convince us to buy a new air conditioning unit. Mike is one of the few contractors that I have worked with that I found to be very honest and trustworthy. I could have done everything with a handshake and felt confident that the job would have been done right. They even cleaned the area up upon completion and left the furnace area cleaner than they found it. We are very happy with the furnace and the job that was done. Don’t get over charged by the other HVAX companies in Kalamazoo. If you need a new furnace or other type of HVAC system, give Mike Schwartz a call.  Tom  

Comparative heating Costs after switching to Rheem Mod 90 furnace installed by Schwartz's:

Four year heating costs for Gary Gillette of Galseburg Michigan. Showing overall efficiency and cost improvement after switching to Rheem Mod 90 propane furnace installed by Schwartz heating and Cooling. 

  

2006-2007 and 2007-2008 Heating Seasons

Heating System: Thermopride Oil Furnace

Output: 140,000 BTU (Fixed)

Efficiency: 79%

Average Run Time/Hour: 25-30 minutes heating

Oil Cost (tax included) 2006-2007: $1,600.00 ($2.28/gallon)

Oil Cost (tax included) 2007-2008: $2,354.00 ($3.36/gallon)

Amount of Oil Used (both seasons): 700 gallons (contract)

Average Room temperature: 70-72 Daytime/ 62 Nighttime

 

2008-2009 and 2009-2010 heating Season

Heating System: Rheem Mod 90 Propane Furnace

Output: 40,000 to 91,600 (variable)

Efficiency: 95%

Average Run Time/Hour: 40-45 minutes

Amount of Propane Used (2008-2009): 790 gallons

Amount of Propane Used (2009-2010): 728 gallons

Propane Cost (tax included) 2008-2009: $1,493.00 ($1.88/gallon)

Propane Cost (tax included) 2009-2010: $1,050.00 ($1.44/gallon)

Average Room temperature: 65-67 Daytime/ 62 Nighttime

Testimonial by Gary L. Gillette :

The Rheem Mod 90 furnace produces the most even heat I have ever experience (no temperature swings at all), which has allowed me to set my thermostat 5 to 7 degrees lower than I did with my old oil furnace to achieve the same degree of comfort and save a lot of money in the process. The special thermostat that comes with the furnace is also precise, and I have never seen the actual room temperature vary more than .5 degree from the thermostat set temperature.

            The Rheem Mod 90 is the quietest furnace I have ever owned. While the burner and fan operate frequently (25% more than my oil furnace did), you can barely hear either one. The only time I ever hear the furnace (fan) is when I raise the thermostat more than five degrees at one time (for example, to re-heat my house when I return home after being gone for a few days, during which I lowered the temperature considerably). Once that job is complete, it reverts back to near-silent mode.

            The Mod 90 can bring my cool house (60 degrees) back to my normal temperate (65-67 degrees) very quickly… in only 30 minutes or so. This observation was surprising; especially since the exhaust temperate is so cool (150-160 degrees at most). What this tells me is that most of the heat energy from the propane I’m burning is going to my house rather than out the exhaust pipe.

            Despite losing 48,400 BTU’s (35%) of the “heating power” for each gallon of fuel I use now (140,000 BTU’s/gal for oil previously compared to 91,600 BTU’s/gal for propane now), I have used just slightly more propane during each of the past 2 heating seasons than I used during the last two years I was burning oil (700 gallons/year for oil versus 750 gallons/year for propane). Considering that the Rheem Mod 90 runs 25% more than my oil furnace did, this fuel savings is obviously due to the Mod 90’s dramatically increased efficiency compared to my old oil furnace.

            I have experience no problems during the two consecutive heating seasons that I have used the Rheem Mod 90 furnace. I simply set it at the time I turn the heat on in the fall and forget it until I turn it off in the spring. Unlike my oil furnace, I Don’t have to service the Rheem Mod 90 every year either (except for changing the air cleaner media, which only takes 10-15 minutes). I don’t miss having to do extra service work, nor the associated expense.

            I had my doubts regarding many of the things I was told by Schwartz Heating & Cooling about the Rheem Mod 90 furnace before I finally bought one, but I can tell you now… after two years of real world experience…that there were no misrepresentations whatsoever. This furnace does precisely what the manufacturer and Schwartz Heating & Cooling say it will do… and it is definitely worth the small additional price you will pay over a non-modulating high-efficiency furnace. Based on the fuel savings alone (excluding maintenance costs of my old oil furnace), the Rheem Mod 90 furnace should pay for itself in another 2 years or so (a 4 year payback period, more or less).

            The tear-out and installation job I received form Schwartz Heating & Cooling was also top notch in every respect. They made no mistakes, so there was no need for any correction. They also did the work when promised, at the price quoted, and with no cost over-runs or unwanted items tacked-on. Once the job began, they worked on it every day, all day until it was completed, rather than doing things in a start/stop/piece-meal fashion like many contractors do.

            My overall satisfaction with the products and the job performed is 100%. If you want a first-rate product coupled with a first-rate installation, Schwartz Heating & Cooling is the place to go. ~Gary Gillette of Galseburg Michigan

 

 

 

 
spacer.png, 0 kB
spacer.png, 0 kB
spacer.png, 0 kB
spacer.png, 0 kB